A572/S355JR Carbon Steel Bar

A572 steel bars are lightweight, but have good strength, ductility and workability, making them ideal for structural applications. These characteristics make the A572 relatively simple to shape into different structures, while maintaining the ability to withstand large stresses and loads.

A36 Carbon Steel Bar

A36 is a low-carbon steel containing trace amounts of manganese, phosphorus, sulfur, silicon and other elements such as copper. A36 has good weldability and high yield strength, and is the most specified structural steel plate by engineers. ASTM A36 is most commonly manufactured as a variety of structural steel parts. This grade is used for welded, bolted or riveted construction of bridges and buildings, as well as for general structural purposes. Due to its lowest yield point, A36 can be used to design lighter-weight structures and equipment, and provide good weldability.

A105 Carbon Steel Bar

A105 is an ASTM specification for steel forgings, primarily for carbon steel forged pipe components. The type of carbon steel wrought alloy involved is a low carbon, manganese and silicon steel similar to the AISI 1330, but with a lower manganese content.

AISI/SAE 1018 Carbon Steel Bar

AISI 1018 carbon steel round bars are made of carbon steel, and its composition includes carbon, chromium, manganese, molybdenum, phosphorus, sulfur and silicon. Carbon steel SAE1018 rods are commonly used for shafts, pins, rods, spindles, sprocket assemblies and a wide range of parts. The 1018 bar can be finely processed without any difficulty, and its chips are hard and continuous, so it can be processed into all shapes.

C11000/T2 Copper Bar

C11000/T2 is pure copper, also known as copper, copper has good electrical conductivity, thermal conductivity, corrosion resistance and processing performance, can be welded and brazed. Contains less impurities to reduce electrical conductivity, thermal conductivity, trace oxygen has little effect on electrical conductivity, thermal conductivity and processing properties, but it is easy to cause "hydrogen disease". It is not suitable for processing (annealing, welding, etc.) and use in a reducing atmosphere at high temperature (such as> 370 ℃).

C10100/TU2 Copper Rod

C10100/TU2C10100 oxygen-free copper cold and hot workability are excellent. Good forgeability. It can be used as a bus bar, waveguide, electron tube lead-in line and anode, vacuum seal, transistor components, speed control tube, microwave tube, rectifier.

C10200/TU1 Copper Rod

C10200/TU1 is a high-purity, oxygen-free, phosphorus-free deoxidized copper in vacuum without evaporating elements. It has high electrical and thermal conductivity, good welding performance and excellent welding performance attributes. It has excellent hot and cold forming properties, and has good compression resistance and corrosion resistance, especially in the atmosphere, due to the good adhesion of the oxide layer.

C12000/TP1 Copper Rod

C12000/TP1 has good welding performance and cold bending performance, generally has no "hydrogen disease" tendency, can be processed and used in reducing atmosphere, but should not be processed and used in oxidizing atmosphere, mainly for pipe application, but also for plate, belt or bar and line supply. Used as gasoline or gas transmission pipe, drain pipe, condenser pipe, mine pipe, condenser, evaporator, heat exchanger, train parts.

C12100 Copper Bar

C12000 welding performance and cold bending performance is good, generally no "hydrogen disease" tendency, can be processed in the reducing atmosphere, use, but not in the oxidizing atmosphere of processing, use, mainly to pipe applications, can also be plate, belt or bar, line supply. Used as gasoline or gas transmission pipe, drain pipe, condenser pipe, mine pipe, condenser, evaporator, heat exchanger, train parts.

C12200/TP2 Copper Rod

C12200/TP2 has good welding performance and cold bending performance. Generally, it has no "hydrogen disease" tendency. It can be processed and used in reducing atmosphere, but it is not suitable for processing and using in oxidizing atmosphere. It is mainly applied in pipe, and can also be supplied in plate, belt or bar and line. Used as gasoline or gas transmission pipe, drain pipe, condenser pipe, mine pipe, condenser, evaporator, heat exchanger, train parts.

C21000/H96 Copper Rod

High strength than pure copper (but in ordinary brass he is lower), good electrical and thermal conductivity, high corrosion resistance in the atmosphere and fresh water, good shaping, easy cold and hot pressure processing, easy forming, welding forging and tinning, no stress corrosion cracking tendency.

C22000/H90 Copper Rod

General brass has good mechanical properties, good plasticity in hot state and plasticity in cold state. It has good machinability, easy brazing and welding, corrosion resistance, but it is prone to corrosion break. In addition, the price is cheap and is widely used as a general brass variety.