Differential Thickness Tinplate (Tinplate)
Classification :
Tinplate Coil
Key words:
PRODUCT DETAILS
Product Description
Common tin plating: 5.6/2.8, 8.4/2.8, 8.4/5.6, 11.2/2.8, 11.2/5.6, 11.2/8.4, 15.1/5.6
Tinplate with a small amount of tinplate is generally used for containers that require less high corrosion resistance and containers that are painted; tinplate with a large amount of tinplate is generally used for cans that require high corrosion resistance, and containers that are not painted directly.
Product Parameters
|
Product Name |
Differential thickness tinplate (tinplate) |
|
Thickness |
0.18mm-0.50mm |
|
Width |
260mm-980mm |
|
Length |
Support customization |
|
tin coating |
General:2.8g or 5.6g, can be produced according to your needs |
|
Substrate Type |
MR / SPCC / L / D |
|
Reference Standard |
GB/T 2520 /JIS G3303 /JIS G3315 /DIN EN 10202 /DIN EN 10203 |
Surface state of tinplate
|
Surface state |
Features |
|
LightSurface |
Electroplated tin smooth raw material strip after melting treatment to obtain the glaze,Smooth surface with very fine grindstone pattern |
|
Stonetextured surface |
Electroplating tin raw material with the glaze obtained after melting treatment,Grindstone pattern with certain direction |
|
Silvercolor surface |
Electroplating tin raw material with the glazed surface obtained after melting treatment, the surface is rough and dull |
|
mattless surface |
The surface of the substrate is rough and dull, and the tin plating layer is not soft melting. |
Substrate Type
|
Substrate Type |
Introduction |
|
MR |
The most general steel, steelmaking impurity residue less, excellent mechanical properties and corrosion resistance |
|
L |
Used for the production of acidic contents (oranges, yellow peaches, pineapples, etc.), and the inner surface of the food cans for iron high corrosion resistance tinplate substrate steel, such tinplate is often calledKPlate |
|
D |
Used to produce two pieces of high-processing tin plate substrate steel, such tin plate is often called.DIMaterial |
|
SPCC |
Chinese characteristics, using ordinary hot rollingSPHCProduces, usually used for miscellaneous tank purposes. |
Coating weight
|
Classification |
Representation of Tin Coating Weight |
Tin plating nominal weight(g/m2) |
Minimum average tin plating weight(g/m2) |
|
Differentiated tin plating (D/A） |
2.2/1.1 |
2.2/1.1 |
2.0/0.9 |
|
2.8/1.1 |
2.8/1.1 |
2.25/0.9 |
|
|
5.6/1.1 |
5.6/1.1 |
5.05/0.9 |
|
|
2.8/2.2 |
2.8/2.2 |
2.25/2.0 |
|
|
5.6/2.2 |
5.6/2.2 |
5.05/2.0 |
|
|
5.6/2.8 |
5.6/2.8 |
5.05/2.25 |
chemical composition
|
No. |
C |
Si |
Mn |
S |
P |
Cu |
Ni |
Cr |
Mo |
|
D |
0.12 |
0.03 |
0.6 |
0.05 |
0.02 |
0.2 |
0.15 |
0.1 |
0.05 |
|
L |
0.13 |
0.03 |
0.6 |
0.05 |
0.15 |
0.03 |
0.04 |
0.06 |
0.05 |
|
MR |
0.13 |
0.03 |
0.6 |
0.05 |
0.2 |
0.2 |
0.2 |
0.1 |
0.05 |
Mechanical Properties & Applications
|
Standard Name |
Nominal hardnessHR30TS |
Strong yieldMPa |
Scope of application |
|
T-1 |
49 |
230 /-50 |
Drawing requirements, drawn ironing cans, nozzles, nozzles, closures |
|
T-2 |
53 |
245 /-50 |
Ring and plug, dome, closure, shallow pull and special tank parts |
|
T-2.5 |
55 |
260 /-50 |
Battery cell, small can cover and body |
|
T-3 |
57 |
275 /-50 |
Cans and cans, large diameter caps, crown caps |
|
T-3.5 |
59 |
290 /-50 |
Can body, closure and crown lid |
|
T-4 |
61 |
340 /-50 |
Can body, closure and crown lid |
|
T-5 |
65 |
480 /-50 |
cans and cans |
|
Standard Name |
Nominal hardnessHR30TS |
Strong yieldMPa |
Scope of application |
|
DR-7.5 |
71 |
520 /-50 |
Cans and cans, drawn and redrawn cans |
|
DR-8 |
72 |
550 /-50 |
Applicable to the requirements of a certain rigidity, strength of beer, carbonated beverage cans and lids, etc. |
|
DR-8.5 |
73 |
580 /-50 |
Cans and cans, drawn and redrawn cans |
|
DR-9 |
75 |
620 /-50 |
Suitable for the requirements of a certain rigidity, strength of beer, carbonated beverage cans and lids andDrD tank body, etc. |
|
DR-9M |
76 |
660 /-50 |
Applicable to the requirements of a certain rigidity, strength of beer, carbonated drinks, such as the lid |
|
DR-10 |
79 |
700 /-50 |
Suitable for high-grade bottle caps that require certain rigidity and strength, etc. |
|
Code |
中国标准 |
日本标准 |
美国标准 |
欧洲标准 |
国际标准 |
|
|
GB/T 2520 |
JIS G3303 |
ASTM A623M |
DIN EN10203 |
ISO 11949 |
|
T-1 |
TH50+SE |
T-1 |
T-1(T49) |
TS230 |
TH50+SE |
|
T-2 |
TH52+SE |
T-2 |
T-2(T53) |
TS245 |
TH52+SE |
|
T-2.5 |
TH55+SE |
T-2.5 |
T-2.5(T55) |
TS260 |
TH55+SE |
|
T-3 |
TH57+SE |
T-3 |
T-3(T570) |
TS275 |
TH57+SE |
|
T-4 |
TH61+SE |
T-4 |
T-4(T61) |
TH415 |
TH61+SE |
|
T-5 |
TH65+SE |
T-5 |
T-5(T65) |
TH435 |
TH65+SE |
|
DR7 |
H71+SE |
DR7 |
DR7(T71) |
TH520 |
H73+SE |
|
DR8 |
H73+SE |
DR8 |
DR8(T73) |
TH550 |
H73+SE |
|
DR9 |
H76+SE |
DR9 |
DR9(T76) |
TH620 |
H76+SE |
RELATED PRODUCTS
GET A FREE QUOTE
CONTACT US
Tel : +86 15666513621
E-mail : sales09@hbiswugangsteel.com
WhatsApp : +86 15666513621
GET A FREE QUOTE
Copyright : WUGANG STEEL GROUP CO., LTD