The correct way to install steel coils

The correct installation method of steel coils mainly includes the following key steps and precautions:

Packaging and fixing: First, choose appropriate packaging materials, such as wooden pallets, cardboard, boards, wooden boxes, etc. These materials should have sufficient strength and load-bearing capacity to ensure that there will be no deformation and other problems during transportation and storage. Wooden pallets are a common choice due to their simple structure, light weight, and high load-bearing capacity.

Binding and stacking: Steel coils should be secured with horizontal and vertical tying to prevent shifting or slipping during transportation and storage. When stacking, they should be placed according to certain rules, such as triangular or rectangular forms, to prevent tilting or collapse.

Padding and padding: Use sleepers or non-slip straw mats under the steel coils to increase friction, and use sufficient padding between the two steel coils to tighten them for fixation. In addition, the first roll of each row of steel coils on both wings must be against the solid bulkhead, and each piece must be against at least two triangular wood liners immediately behind the discharge to prevent movement.

Loading method: Choose the appropriate loading method according to the ratio of the width and diameter of the steel coil. If the ratio of width to diameter is less than or equal to 0.7, the vertical loading method should be selected; if the ratio of width to diameter is greater than 0.7 and the width is smaller than the width of the vehicle, the horizontal loading method should be selected; if the width and diameter When the ratio is greater than 0.7 and the width is greater than or equal to the vehicle width, the horizontal longitudinal loading method should be selected.

Safety requirements: The loading of steel coils must comply with the requirements of the International Road Transport Safety Cargo Securing Guidelines, including the use of wave racks or adjustable stands for loading, and the use of fastening devices such as fastening straps, wire ropes, and chains for bundling and fastening.

Inspection and maintenance: During transportation, the fixation of the steel coils should be checked regularly to ensure that there is no looseness or damage. If it is transported for a long time or in a special environment, it is necessary to strengthen maintenance and ensure that the transportation tool is in good condition.

By following the above steps and precautions, you can ensure the safety and stability of steel coils during transportation.